
Learn Arduino
A 3D Arduino Uno: from lighting an LED to your first project
@DilumSanjayaMade with ClaudeIn Spanish
Interactive labs and machines to learn robotics. 18 of the 24 were made with Claude, according to their authors. Each one with its author, what you learn and which stage of the roadmap it helps with; they open on their original site, and the RobotVisual ones, in 3D, you try right here.
24 labs

A 3D Arduino Uno: from lighting an LED to your first project
@DilumSanjayaMade with ClaudeIn Spanish

13 real boards you assemble like in a factory, power up and break
@0xMovezMade with Claude

ESP32-S3 with a live pinout and the firmware explained line by line
@abderrahmen_gMade with ClaudeIn Spanish


A small motor, a worm gear and gears that push against your finger
@elvar_officialMade with Claude

Counterweight and emergency brake: the motor only carries the difference
@elvar_officialMade with Claude

A light and a sensor that only see each other when there is smoke
@elvar_officialMade with Claude

How a servo knows which angle to move to, in 3D and from the inside
RobotVisualMade with ClaudeIn Spanish

Power supply, fan and chip: how a computer is powered and cooled
@elvar_officialMade with Claude


DNS, TCP, TLS and HTTP step by step, dropping pieces on purpose
@suvroghoshin


Propellers in pairs that cancel their spin: that is how a drone moves and turns
@elvar_officialMade with Claude

12 motors, 5 pairs of cameras and a leg with three motors
@elvar_officialMade with Claude

Joints with motors that turn further than a person’s
@elvar_official

A laser sensor to map and a gripper arm that tucks itself away
@elvar_official

Gear train and escapement: how a spring’s energy is shared out
@elvar_officialMade with Claude





The trip of the ultrasonic echo and the time math, in 3D
RobotVisualMade with ClaudeIn Spanish
The four switches that reverse the current, in 3D
RobotVisualMade with ClaudeIn Spanish
They aren’t visual learning: you don’t follow a lesson here, you build your own circuits from scratch. That is why the roadmap uses them for the practice in stages 1 to 3.

Build your own circuits from scratch on a virtual breadboard
SimulatorAutodeskSeveral languages
Open